diff options
Diffstat (limited to '.ncmpcpp')
| -rw-r--r-- | .ncmpcpp/bindings | 612 | ||||
| -rw-r--r-- | .ncmpcpp/config | 545 |
2 files changed, 0 insertions, 1157 deletions
diff --git a/.ncmpcpp/bindings b/.ncmpcpp/bindings deleted file mode 100644 index 6eecd3e..0000000 --- a/.ncmpcpp/bindings +++ /dev/null @@ -1,612 +0,0 @@ -############################################################## -## This is the example bindings file. Copy it to ## -## ~/.ncmpcpp/bindings or $XDG_CONFIG_HOME/ncmpcpp/bindings ## -## and set up your preferences ## -############################################################## -## -##### General rules ##### -## -## 1) Because each action has runtime checks whether it's -## ok to run it, a few actions can be bound to one key. -## Actions will be bound in order given in configuration -## file. When a key is pressed, first action in order -## will test itself whether it's possible to run it. If -## test succeeds, action is executed and other actions -## bound to this key are ignored. If it doesn't, next -## action in order tests itself etc. -## -## 2) It's possible to bind more that one action at once -## to a key. It can be done using the following syntax: -## -## def_key "key" -## action1 -## action2 -## ... -## -## This creates a chain of actions. When such chain is -## executed, each action in chain is run until the end of -## chain is reached or one of its actions fails to execute -## due to its requirements not being met. If multiple actions -## and/or chains are bound to the same key, they will be -## consecutively run until one of them gets fully executed. -## -## 3) When ncmpcpp starts, bindings configuration file is -## parsed and then ncmpcpp provides "missing pieces" -## of default keybindings. If you want to disable some -## bindings, there is a special action called 'dummy' -## for that purpose. Eg. if you want to disable ability -## to crop playlists, you need to put the following -## into configuration file: -## -## def_key "C" -## dummy -## -## After that ncmpcpp will not bind any default action -## to this key. -## -## 4) To let you write simple macros, the following special -## actions are provided: -## -## - push_character "character" - pushes given special -## character into input queue, so it will be immediately -## picked by ncmpcpp upon next call to readKey function. -## Accepted values: mouse, up, down, page_up, page_down, -## home, end, space, enter, insert, delete, left, right, -## tab, ctrl-a, ctrl-b, ..., ctrl-z, ctrl-[, ctrl-\\, -## ctrl-], ctrl-^, ctrl-_, f1, f2, ..., f12, backspace. -## In addition, most of these names can be prefixed with -## alt-/ctrl-/shift- to be recognized with the appropriate -## modifier key(s). -## -## - push_characters "string" - pushes given string into -## input queue. -## -## - require_runnable "action" - checks whether given action -## is runnable and fails if it isn't. This is especially -## useful when mixed with previous two functions. Consider -## the following macro definition: -## -## def_key "key" -## push_characters "custom_filter" -## apply_filter -## -## If apply_filter can't be currently run, we end up with -## sequence of characters in input queue which will be -## treated just as we typed them. This may lead to unexpected -## results (in this case 'c' will most likely clear current -## playlist, 'u' will trigger database update, 's' will stop -## playback etc.). To prevent such thing from happening, we -## need to change above definition to this one: -## -## def_key "key" -## require_runnable "apply_filter" -## push_characters "custom_filter" -## apply_filter -## -## Here, first we test whether apply_filter can be actually run -## before we stuff characters into input queue, so if condition -## is not met, whole chain is aborted and we're fine. -## -## - require_screen "screen" - checks whether given screen is -## currently active. accepted values: browser, clock, help, -## media_library, outputs, playlist, playlist_editor, -## search_engine, tag_editor, visualizer, last_fm, lyrics, -## selected_items_adder, server_info, song_info, -## sort_playlist_dialog, tiny_tag_editor. -## -## - run_external_command "command" - runs given command using -## system() function. -## -## 5) In addition to binding to a key, you can also bind actions -## or chains of actions to a command. If it comes to commands, -## syntax is very similar to defining keys. Here goes example -## definition of a command: -## -## def_command "quit" [deferred] -## stop -## quit -## -## If you execute the above command (which can be done by -## invoking action execute_command, typing 'quit' and pressing -## enter), ncmpcpp will stop the player and then quit. Note the -## presence of word 'deferred' enclosed in square brackets. It -## tells ncmpcpp to wait for confirmation (ie. pressing enter) -## after you typed quit. Instead of 'deferred', 'immediate' -## could be used. Then ncmpcpp will not wait for confirmation -## (enter) and will execute the command the moment it sees it. -## -## Note: while command chains are executed, internal environment -## update (which includes current window refresh and mpd status -## update) is not performed for performance reasons. However, it -## may be desirable to do so in some situration. Therefore it's -## possible to invoke by hand by performing 'update enviroment' -## action. -## -## Note: There is a difference between: -## -## def_key "key" -## action1 -## -## def_key "key" -## action2 -## -## and -## -## def_key "key" -## action1 -## action2 -## -## First one binds two single actions to the same key whilst -## second one defines a chain of actions. The behavior of -## these two is different and is described in (1) and (2). -## -## Note: Function def_key accepts non-ascii characters. -## -##### List of unbound actions ##### -## -## The following actions are not bound to any key/command: -## -## - set_volume -## -# -#def_key "mouse" -# mouse_event -# -#def_key "up" -# scroll_up -# -#def_key "shift-up" -# select_item -# scroll_up -# -#def_key "down" -# scroll_down -# -#def_key "shift-down" -# select_item -# scroll_down -# -#def_key "[" -# scroll_up_album -# -#def_key "]" -# scroll_down_album -# -#def_key "{" -# scroll_up_artist -# -#def_key "}" -# scroll_down_artist -# -#def_key "page_up" -# page_up -# -#def_key "page_down" -# page_down -# -#def_key "home" -# move_home -# -#def_key "end" -# move_end -# -#def_key "insert" -# select_item -# -#def_key "enter" -# enter_directory -# -#def_key "enter" -# toggle_output -# -#def_key "enter" -# run_action -# -#def_key "enter" -# play_item -# -#def_key "space" -# add_item_to_playlist -# -#def_key "space" -# toggle_lyrics_update_on_song_change -# -#def_key "space" -# toggle_visualization_type -# -#def_key "delete" -# delete_playlist_items -# -#def_key "delete" -# delete_browser_items -# -#def_key "delete" -# delete_stored_playlist -# -#def_key "right" -# next_column -# -#def_key "right" -# slave_screen -# -#def_key "right" -# volume_up -# -#def_key "+" -# volume_up -# -#def_key "left" -# previous_column -# -#def_key "left" -# master_screen -# -#def_key "left" -# volume_down -# -#def_key "-" -# volume_down -# -#def_key ":" -# execute_command -# -#def_key "tab" -# next_screen -# -#def_key "shift-tab" -# previous_screen -# -#def_key "f1" -# show_help -# -#def_key "1" -# show_playlist -# -#def_key "2" -# show_browser -# -#def_key "2" -# change_browse_mode -# -#def_key "3" -# show_search_engine -# -#def_key "3" -# reset_search_engine -# -#def_key "4" -# show_media_library -# -#def_key "4" -# toggle_media_library_columns_mode -# -#def_key "5" -# show_playlist_editor -# -#def_key "6" -# show_tag_editor -# -#def_key "7" -# show_outputs -# -#def_key "8" -# show_visualizer -# -#def_key "=" -# show_clock -# -#def_key "@" -# show_server_info -# -#def_key "s" -# stop -# -#def_key "p" -# pause -# -#def_key ">" -# next -# -#def_key "<" -# previous -# -#def_key "ctrl-h" -# jump_to_parent_directory -# -#def_key "ctrl-h" -# replay_song -# -#def_key "backspace" -# jump_to_parent_directory -# -#def_key "backspace" -# replay_song -# -#def_key "f" -# seek_forward -# -#def_key "b" -# seek_backward -# -#def_key "r" -# toggle_repeat -# -#def_key "z" -# toggle_random -# -#def_key "y" -# save_tag_changes -# -#def_key "y" -# start_searching -# -#def_key "y" -# toggle_single -# -#def_key "R" -# toggle_consume -# -#def_key "Y" -# toggle_replay_gain_mode -# -#def_key "T" -# toggle_add_mode -# -#def_key "|" -# toggle_mouse -# -#def_key "#" -# toggle_bitrate_visibility -# -#def_key "Z" -# shuffle -# -#def_key "x" -# toggle_crossfade -# -#def_key "X" -# set_crossfade -# -#def_key "u" -# update_database -# -#def_key "ctrl-s" -# sort_playlist -# -#def_key "ctrl-s" -# toggle_browser_sort_mode -# -#def_key "ctrl-s" -# toggle_media_library_sort_mode -# -#def_key "ctrl-r" -# reverse_playlist -# -#def_key "ctrl-f" -# apply_filter -# -#def_key "ctrl-_" -# select_found_items -# -#def_key "/" -# find -# -#def_key "/" -# find_item_forward -# -#def_key "?" -# find -# -#def_key "?" -# find_item_backward -# -#def_key "." -# next_found_item -# -#def_key "," -# previous_found_item -# -#def_key "w" -# toggle_find_mode -# -#def_key "e" -# edit_song -# -#def_key "e" -# edit_library_tag -# -#def_key "e" -# edit_library_album -# -#def_key "e" -# edit_directory_name -# -#def_key "e" -# edit_playlist_name -# -#def_key "e" -# edit_lyrics -# -#def_key "i" -# show_song_info -# -#def_key "I" -# show_artist_info -# -#def_key "g" -# jump_to_position_in_song -# -#def_key "l" -# show_lyrics -# -#def_key "ctrl-v" -# select_range -# -#def_key "v" -# reverse_selection -# -#def_key "V" -# remove_selection -# -#def_key "B" -# select_album -# -#def_key "a" -# add_selected_items -# -#def_key "c" -# clear_playlist -# -#def_key "c" -# clear_main_playlist -# -#def_key "C" -# crop_playlist -# -#def_key "C" -# crop_main_playlist -# -#def_key "m" -# move_sort_order_up -# -#def_key "m" -# move_selected_items_up -# -#def_key "n" -# move_sort_order_down -# -#def_key "n" -# move_selected_items_down -# -#def_key "M" -# move_selected_items_to -# -#def_key "A" -# add -# -#def_key "S" -# save_playlist -# -#def_key "o" -# jump_to_playing_song -# -#def_key "G" -# jump_to_browser -# -#def_key "G" -# jump_to_playlist_editor -# -#def_key "~" -# jump_to_media_library -# -#def_key "E" -# jump_to_tag_editor -# -#def_key "U" -# toggle_playing_song_centering -# -#def_key "P" -# toggle_display_mode -# -#def_key "\\" -# toggle_interface -# -#def_key "!" -# toggle_separators_between_albums -# -#def_key "L" -# toggle_lyrics_fetcher -# -#def_key "F" -# fetch_lyrics_in_background -# -#def_key "alt-l" -# toggle_fetching_lyrics_in_background -# -#def_key "ctrl-l" -# toggle_screen_lock -# -#def_key "`" -# toggle_library_tag_type -# -#def_key "`" -# refetch_lyrics -# -#def_key "`" -# add_random_items -# -#def_key "ctrl-p" -# set_selected_items_priority -# -#def_key "q" -# quit -# -# -def_key "f" - find -def_key "f" - find_item_forward - -def_key "+" - show_clock -def_key "=" - volume_up - -def_key "j" - scroll_down -def_key "k" - scroll_up - -def_key "ctrl-u" - page_up -#push_characters "kkkkkkkkkkkkkkk" -def_key "ctrl-d" - page_down -#push_characters "jjjjjjjjjjjjjjj" -def_key "u" - page_up -#push_characters "kkkkkkkkkkkkkkk" -def_key "d" - page_down -#push_characters "jjjjjjjjjjjjjjj" -def_key "h" - previous_column -def_key "l" - next_column - -def_key "." - show_lyrics - -def_key "n" - next_found_item -def_key "N" - previous_found_item - -# not used but bound -def_key "J" - move_sort_order_down -def_key "K" - move_sort_order_up -def_key "h" - jump_to_parent_directory -def_key "l" - enter_directory -def_key "l" - run_action -def_key "l" - play_item -def_key "m" - show_media_library -def_key "m" - toggle_media_library_columns_mode -def_key "t" - show_tag_editor -def_key "v" - show_visualizer -def_key "G" - move_end -def_key "g" - move_home -#jump_to_position_in_song -def_key "U" - update_database diff --git a/.ncmpcpp/config b/.ncmpcpp/config deleted file mode 100644 index 999c6bc..0000000 --- a/.ncmpcpp/config +++ /dev/null @@ -1,545 +0,0 @@ -############################################################################## -## This is the example configuration file. Copy it to $HOME/.ncmpcpp/config ## -## or $XDG_CONFIG_HOME/ncmpcpp/config and set up your preferences. ## -############################################################################## -# -##### directories ###### -## -## Directory for storing ncmpcpp related files. Changing it is useful if you -## want to store everything somewhere else and provide command line setting for -## alternative location to config file which defines that while launching -## ncmpcpp. -## -# -#ncmpcpp_directory = ~/.ncmpcpp -# -## -## Directory for storing downloaded lyrics. It defaults to ~/.lyrics since other -## MPD clients (eg. ncmpc) also use that location. -## -# -#lyrics_directory = ~/.lyrics -# -##### connection settings ##### -# -#mpd_host = localhost -# -#mpd_port = 6600 -# -#mpd_connection_timeout = 5 -# -## Needed for tag editor and file operations to work. -## -mpd_music_dir = "~/Music" -# -#mpd_crossfade_time = 5 -# -##### music visualizer ##### -## -## Note: In order to make music visualizer work you'll need to use mpd fifo -## output, whose format parameter has to be set to 44100:16:1 for mono -## visualization or 44100:16:2 for stereo visualization. Example configuration -## (it has to be put into mpd.conf): -## -## audio_output { -## type "fifo" -## name "Visualizer feed" -## path "/tmp/mpd.fifo" -## format "44100:16:2" -## } -## -# -#visualizer_fifo_path = /tmp/mpd.fifo -# -## -## Note: Below parameter is needed for ncmpcpp to determine which output -## provides data for visualizer and thus allow syncing between visualization and -## sound as currently there are some problems with it. -## -# -#visualizer_output_name = Visualizer feed -# -## -## If you set format to 44100:16:2, make it 'yes'. -## -#visualizer_in_stereo = yes -# -## -## Note: Below parameter defines how often ncmpcpp has to "synchronize" -## visualizer and audio outputs. 30 seconds is optimal value, but if you -## experience synchronization problems, set it to lower value. Keep in mind -## that sane values start with >=10. -## -# -#visualizer_sync_interval = 30 -# -## -## Note: To enable spectrum frequency visualization you need to compile ncmpcpp -## with fftw3 support. -## -# -## Available values: spectrum, wave, wave_filled, ellipse. -## -visualizer_type = spectrum -# -#visualizer_look = ●卐 -#visualizer_look = 卐 -# -#visualizer_color = blue, cyan, green, yellow, magenta, red -# -## Alternative subset of 256 colors for terminals that support it. -## -#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161 -# -##### system encoding ##### -## -## ncmpcpp should detect your charset encoding but if it failed to do so, you -## can specify charset encoding you are using here. -## -## Note: You can see whether your ncmpcpp build supports charset detection by -## checking output of `ncmpcpp --version`. -## -## Note: Since MPD uses UTF-8 by default, setting this option makes sense only -## if your encoding is different. -## -# -#system_encoding = "" -# -##### delays ##### -# -## Time of inactivity (in seconds) after playlist highlighting will be disabled -## (0 = always on). -## -#playlist_disable_highlight_delay = 5 -# -## Defines how long messages are supposed to be visible. -## -message_delay_time = 1 -# -##### song format ##### -## -## For a song format you can use: -## -## %l - length -## %f - filename -## %D - directory -## %a - artist -## %A - album artist -## %t - title -## %b - album -## %y - date -## %n - track number (01/12 -> 01) -## %N - full track info (01/12 -> 01/12) -## %g - genre -## %c - composer -## %p - performer -## %d - disc -## %C - comment -## %P - priority -## $R - begin right alignment -## -## If you want to make sure that a part of the format is displayed only when -## certain tags are present, you can archieve it by grouping them with brackets, -## e.g. '{%a - %t}' will be evaluated to 'ARTIST - TITLE' if both tags are -## present or '' otherwise. It is also possible to define a list of -## alternatives by providing several groups and separating them with '|', -## e.g. '{%t}|{%f}' will be evaluated to 'TITLE' or 'FILENAME' if the former is -## not present. -## -## Note: If you want to set limit on maximal length of a tag, just put the -## appropriate number between % and character that defines tag type, e.g. to -## make album take max. 20 terminal cells, use '%20b'. -## -## In addition, formats support markers used for text attributes. They are -## followed by character '$'. After that you can put: -## -## - 0 - default window color (discards all other colors) -## - 1 - black -## - 2 - red -## - 3 - green -## - 4 - yellow -## - 5 - blue -## - 6 - magenta -## - 7 - cyan -## - 8 - white -## - 9 - end of current color -## - b - bold text -## - u - underline text -## - r - reverse colors -## - a - use alternative character set -## -## If you don't want to use a non-color attribute anymore, just put it again, -## but this time insert character '/' between '$' and attribute character, -## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename with -## reversed colors. -## -## If you want to use 256 colors and/or background colors in formats (the naming -## scheme is described below in section about color definitions), it can be done -## with the syntax $(COLOR), e.g. to set the artist tag to one of the -## non-standard colors and make it have yellow background, you need to write -## $(197_yellow)%a$(end). Note that for standard colors this is interchangable -## with attributes listed above. -## -## Note: colors can be nested. -## -# -song_list_format = {$4%a - }{%t}|{$8%f$9}$R{$3(%l)$9} -# -song_status_format = $b{{$8"%t"}} $3by {$4%a{ $3in $7%b{ (%y)}} $3}|{$8%f} -# -song_library_format = {%n - }{%t}|{%f} -# -alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b -# -alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D} -# -current_item_prefix = $(cyan)$r$b -# -current_item_suffix = $/r$(end)$/b -# -current_item_inactive_column_prefix = $(magenta)$r -# -current_item_inactive_column_suffix = $/r$(end) -# -#now_playing_prefix = $b -# -#now_playing_suffix = $/b -# -#browser_playlist_prefix = "$2playlist$9 " -# -#selected_item_prefix = $6 -# -#selected_item_suffix = $9 -# -#modified_item_prefix = $3> $9 -# -## -## Note: attributes are not supported for the following variables. -## -#song_window_title_format = {%a - }{%t}|{%f} -## -## Note: Below variables are used for sorting songs in browser. The sort mode -## determines how songs are sorted, and can be used in combination with a sort -## format to specify a custom sorting format. Available values for -## browser_sort_mode are "name", "mtime", "format" and "noop". -## -# -#browser_sort_mode = name -# -#browser_sort_format = {%a - }{%t}|{%f} {(%l)} -# -##### columns settings ##### -## -## syntax of song columns list format is "column column etc." -## -## - syntax for each column is: -## -## (width of the column)[color of the column]{displayed tag} -## -## Note: Width is by default in %, if you want a column to have fixed size, add -## 'f' after the value, e.g. (10)[white]{a} will be the column that take 10% of -## screen (so the real width will depend on actual screen size), whereas -## (10f)[white]{a} will take 10 terminal cells, no matter how wide the screen -## is. -## -## - color is optional (if you want the default one, leave the field empty). -## -## Note: You can give a column additional attributes by putting appropriate -## character after displayed tag character. Available attributes are: -## -## - r - column will be right aligned -## - E - if tag is empty, empty tag marker won't be displayed -## -## You can also: -## -## - give a column custom name by putting it after attributes, separated with -## character ':', e.g. {lr:Length} gives you right aligned column of lengths -## named "Length". -## -## - define sequence of tags, that have to be displayed in case predecessor is -## empty in a way similar to the one in classic song format, i.e. using '|' -## character, e.g. {a|c|p:Owner} creates column named "Owner" that tries to -## display artist tag and then composer and performer if previous ones are not -## available. -## -# -#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l} -# -##### various settings ##### -# -## -## Note: Custom command that will be executed each time song changes. Useful for -## notifications etc. -## -#execute_on_song_change = "" -# -## -## Note: Custom command that will be executed each time player state -## changes. The environment variable MPD_PLAYER_STATE is set to the current -## state (either unknown, play, pause, or stop) for its duration. -## -# -#execute_on_player_state_change = "" -# -#playlist_show_mpd_host = no -# -#playlist_show_remaining_time = no -# -#playlist_shorten_total_times = no -# -#playlist_separate_albums = no -# -## -## Note: Possible display modes: classic, columns. -## -#playlist_display_mode = columns -# -browser_display_mode = columns -# -#search_engine_display_mode = classic -# -#playlist_editor_display_mode = classic -# -#discard_colors_if_item_is_selected = yes -# -#show_duplicate_tags = true -# -#incremental_seeking = yes -# -#seek_time = 1 -# -#volume_change_step = 2 -# -#autocenter_mode = no -# -#centered_cursor = no -# -## -## Note: You can specify third character which will be used to build 'empty' -## part of progressbar. -## -progressbar_look = -> -# -## Available values: database, playlist. -## -#default_place_to_search_in = database -# -## Available values: classic, alternative. -## -#user_interface = classic -# -#data_fetching_delay = yes -# -## Available values: artist, album_artist, date, genre, composer, performer. -## -media_library_primary_tag = album_artist -# -media_library_albums_split_by_date = no -# -## Available values: wrapped, normal. -## -#default_find_mode = wrapped -# -#default_tag_editor_pattern = %n - %t -# -#header_visibility = yes -# -#statusbar_visibility = yes -# -#titles_visibility = yes -# -#header_text_scrolling = yes -# -#cyclic_scrolling = no -# -#lines_scrolled = 2 -# -#lyrics_fetchers = lyricwiki, azlyrics, genius, sing365, lyricsmania, metrolyrics, justsomelyrics, jahlyrics, plyrics, tekstowo, internet -# -#follow_now_playing_lyrics = no -# -#fetch_lyrics_for_current_song_in_background = no -# -#store_lyrics_in_song_dir = no -# -#generate_win32_compatible_filenames = yes -# -#allow_for_physical_item_deletion = no -# -## -## Note: If you set this variable, ncmpcpp will try to get info from last.fm in -## language you set and if it fails, it will fall back to english. Otherwise it -## will use english the first time. -## -## Note: Language has to be expressed as an ISO 639 alpha-2 code. -## -#lastfm_preferred_language = en -# -#space_add_mode = add_remove -# -#show_hidden_files_in_local_browser = no -# -## -## How shall screen switcher work? -## -## - "previous" - switch between the current and previous screen. -## - "screen1,...,screenN" - switch between given sequence of screens. -## -## Screens available for use: help, playlist, browser, search_engine, -## media_library, playlist_editor, tag_editor, outputs, visualizer, clock, -## lyrics, last_fm. -## -#screen_switcher_mode = playlist, browser -# -## -## Note: You can define startup screen by choosing screen from the list above. -## -startup_screen = media_library -# -## -## Note: You can define startup slave screen by choosing screen from the list -## above or an empty value for no slave screen. -## -#startup_slave_screen = "" -# -#startup_slave_screen_focus = no -# -## -## Default width of locked screen (in %). Acceptable values are from 20 to 80. -## -# -#locked_screen_width_part = 50 -# -#ask_for_locked_screen_width_part = yes -# -#jump_to_now_playing_song_at_start = yes -# -#ask_before_clearing_playlists = yes -# -#clock_display_seconds = no -# -display_volume_level = no -# -#display_bitrate = no -# -#display_remaining_time = no -# -## Available values: none, basic, extended, perl. -## -#regular_expressions = perl -# -## -## Note: if below is enabled, ncmpcpp will ignore leading "The" word while -## sorting items in browser, tags in media library, etc. -## -ignore_leading_the = yes -# -## -## Note: if below is enabled, ncmpcpp will ignore diacritics while searching and -## filtering lists. This takes an effect only if boost was compiled with ICU -## support. -## -#ignore_diacritics = no -# -#block_search_constraints_change_if_items_found = yes -# -#mouse_support = yes -# -#mouse_list_scroll_whole_page = yes -# -#empty_tag_marker = <empty> -# -#tags_separator = " | " -# -#tag_editor_extended_numeration = no -# -#media_library_sort_by_mtime = no -# -#enable_window_title = yes -# -## -## Note: You can choose default search mode for search engine. Available modes -## are: -## -## - 1 - use mpd built-in searching (no regexes, pattern matching) -## -## - 2 - use ncmpcpp searching (pattern matching with support for regexes, but -## if your mpd is on a remote machine, downloading big database to process -## it can take a while -## -## - 3 - match only exact values (this mode uses mpd function for searching in -## database and local one for searching in current playlist) -## -# -#search_engine_default_search_mode = 1 -# -external_editor = vim -# -## Note: set to yes if external editor is a console application. -## -use_console_editor = yes -# -##### colors definitions ##### -## -## It is possible to set a background color by setting a color value -## "<foreground>_<background>", e.g. red_black will set foregound color to red -## and background color to black. -## -## In addition, for terminals that support 256 colors it is possible to set one -## of them by using a number in range [1, 256] instead of color name, -## e.g. numerical value corresponding to red_black is 2_1. To find out if the -## terminal supports 256 colors, run ncmpcpp and check out the bottom of the -## help screen for list of available colors and their numerical values. -## -## What is more, there are two special values for the background color: -## "transparent" and "current". The first one explicitly sets the background to -## be transparent, while the second one allows you to preserve current -## background color and change only the foreground one. It's used implicitly -## when background color is not specified. -## -## Moreover, it is possible to attach format information to selected color -## variables by appending to their end a colon followed by one or more format -## flags, e.g. black:b or red:ur. The following variables support this syntax: -## visualizer_color, color1, color2, empty_tag_color, volume_color, -## state_line_color, state_flags_color, progressbar_color, -## progressbar_elapsed_color, player_state_color, statusbar_time_color, -## alternative_ui_separator_color. -## -## Note: due to technical limitations of older ncurses version, if 256 colors -## are used there is a possibility that you'll be able to use only colors with -## transparent background. -# -#colors_enabled = yes -# -empty_tag_color = magenta -# -#header_window_color = magenta -# -#volume_color = default -# -#state_line_color = default -# -#state_flags_color = default:b -# -#main_window_color = white -# -#color1 = white -# -#color2 = green -# -progressbar_color = black:b -# -progressbar_elapsed_color = blue:b -# -statusbar_color = red -# -statusbar_time_color = cyan:b -# -#player_state_color = default:b -# -#alternative_ui_separator_color = black:b -# -#window_border_color = green -# -#active_window_border = red -# |