From 2619a88fcd94cbd4b2caa719ba926ae0013fb4ec Mon Sep 17 00:00:00 2001 From: Luke Smith Date: Fri, 25 Dec 2020 08:02:50 -0500 Subject: statusbar scripts now with sb- to avoid conflicts update dwmblocks build to avoid errors --- .local/bin/statusbar/battery | 39 --------------------------- .local/bin/statusbar/clock | 29 -------------------- .local/bin/statusbar/cpu | 12 --------- .local/bin/statusbar/cpubars | 44 ------------------------------ .local/bin/statusbar/crypto | 54 ------------------------------------- .local/bin/statusbar/disk | 23 ---------------- .local/bin/statusbar/forecast | 35 ------------------------ .local/bin/statusbar/help-icon | 17 ------------ .local/bin/statusbar/internet | 24 ----------------- .local/bin/statusbar/iplocate | 10 ------- .local/bin/statusbar/kbselect | 16 ----------- .local/bin/statusbar/mailbox | 20 -------------- .local/bin/statusbar/memory | 12 --------- .local/bin/statusbar/moonphase | 37 ------------------------- .local/bin/statusbar/mpdup | 8 ------ .local/bin/statusbar/music | 19 ------------- .local/bin/statusbar/nettraf | 29 -------------------- .local/bin/statusbar/news | 17 ------------ .local/bin/statusbar/pacpackages | 29 -------------------- .local/bin/statusbar/popupgrade | 9 ------- .local/bin/statusbar/price | 38 -------------------------- .local/bin/statusbar/sb-battery | 39 +++++++++++++++++++++++++++ .local/bin/statusbar/sb-clock | 29 ++++++++++++++++++++ .local/bin/statusbar/sb-cpu | 12 +++++++++ .local/bin/statusbar/sb-cpubars | 44 ++++++++++++++++++++++++++++++ .local/bin/statusbar/sb-crypto | 54 +++++++++++++++++++++++++++++++++++++ .local/bin/statusbar/sb-disk | 23 ++++++++++++++++ .local/bin/statusbar/sb-forecast | 35 ++++++++++++++++++++++++ .local/bin/statusbar/sb-help-icon | 17 ++++++++++++ .local/bin/statusbar/sb-internet | 24 +++++++++++++++++ .local/bin/statusbar/sb-iplocate | 10 +++++++ .local/bin/statusbar/sb-kbselect | 16 +++++++++++ .local/bin/statusbar/sb-mailbox | 20 ++++++++++++++ .local/bin/statusbar/sb-memory | 12 +++++++++ .local/bin/statusbar/sb-moonphase | 37 +++++++++++++++++++++++++ .local/bin/statusbar/sb-mpdup | 8 ++++++ .local/bin/statusbar/sb-music | 19 +++++++++++++ .local/bin/statusbar/sb-nettraf | 29 ++++++++++++++++++++ .local/bin/statusbar/sb-news | 17 ++++++++++++ .local/bin/statusbar/sb-pacpackages | 29 ++++++++++++++++++++ .local/bin/statusbar/sb-popupgrade | 9 +++++++ .local/bin/statusbar/sb-price | 38 ++++++++++++++++++++++++++ .local/bin/statusbar/sb-torrent | 27 +++++++++++++++++++ .local/bin/statusbar/sb-volume | 28 +++++++++++++++++++ .local/bin/statusbar/torrent | 27 ------------------- .local/bin/statusbar/volume | 28 ------------------- 46 files changed, 576 insertions(+), 576 deletions(-) delete mode 100755 .local/bin/statusbar/battery delete mode 100755 .local/bin/statusbar/clock delete mode 100755 .local/bin/statusbar/cpu delete mode 100755 .local/bin/statusbar/cpubars delete mode 100755 .local/bin/statusbar/crypto delete mode 100755 .local/bin/statusbar/disk delete mode 100755 .local/bin/statusbar/forecast delete mode 100755 .local/bin/statusbar/help-icon delete mode 100755 .local/bin/statusbar/internet delete mode 100755 .local/bin/statusbar/iplocate delete mode 100755 .local/bin/statusbar/kbselect delete mode 100755 .local/bin/statusbar/mailbox delete mode 100755 .local/bin/statusbar/memory delete mode 100755 .local/bin/statusbar/moonphase delete mode 100755 .local/bin/statusbar/mpdup delete mode 100755 .local/bin/statusbar/music delete mode 100755 .local/bin/statusbar/nettraf delete mode 100755 .local/bin/statusbar/news delete mode 100755 .local/bin/statusbar/pacpackages delete mode 100755 .local/bin/statusbar/popupgrade delete mode 100755 .local/bin/statusbar/price create mode 100755 .local/bin/statusbar/sb-battery create mode 100755 .local/bin/statusbar/sb-clock create mode 100755 .local/bin/statusbar/sb-cpu create mode 100755 .local/bin/statusbar/sb-cpubars create mode 100755 .local/bin/statusbar/sb-crypto create mode 100755 .local/bin/statusbar/sb-disk create mode 100755 .local/bin/statusbar/sb-forecast create mode 100755 .local/bin/statusbar/sb-help-icon create mode 100755 .local/bin/statusbar/sb-internet create mode 100755 .local/bin/statusbar/sb-iplocate create mode 100755 .local/bin/statusbar/sb-kbselect create mode 100755 .local/bin/statusbar/sb-mailbox create mode 100755 .local/bin/statusbar/sb-memory create mode 100755 .local/bin/statusbar/sb-moonphase create mode 100755 .local/bin/statusbar/sb-mpdup create mode 100755 .local/bin/statusbar/sb-music create mode 100755 .local/bin/statusbar/sb-nettraf create mode 100755 .local/bin/statusbar/sb-news create mode 100755 .local/bin/statusbar/sb-pacpackages create mode 100755 .local/bin/statusbar/sb-popupgrade create mode 100755 .local/bin/statusbar/sb-price create mode 100755 .local/bin/statusbar/sb-torrent create mode 100755 .local/bin/statusbar/sb-volume delete mode 100755 .local/bin/statusbar/torrent delete mode 100755 .local/bin/statusbar/volume (limited to '.local') diff --git a/.local/bin/statusbar/battery b/.local/bin/statusbar/battery deleted file mode 100755 index d0272ec..0000000 --- a/.local/bin/statusbar/battery +++ /dev/null @@ -1,39 +0,0 @@ -#!/bin/sh - -# Prints all batteries, their percentage remaining and an emoji corresponding -# to charge status (🔌 for plugged up, 🔋 for discharging on battery, etc.). - -case $BLOCK_BUTTON in - 3) notify-send "🔋 Battery module" "🔋: discharging -🛑: not charging -♻: stagnant charge -🔌: charging -⚡: charged -❗: battery very low! -- Scroll to change adjust xbacklight." ;; - 4) xbacklight -inc 10 ;; - 5) xbacklight -dec 10 ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -# Check if battery directories are detected -[ ! -e /sys/class/power_supply/BAT?* ] && echo "No battery found" && exit 1 - -# Loop through all attached batteries and format the info -for battery in /sys/class/power_supply/BAT?* -do - # Sets up the status and capacity - status=$(cat "$battery/status") - case "$status" in - "Full") status="⚡" ;; - "Discharging") status="🔋" ;; - "Charging") status="🔌" ;; - "Not charging") status="🛑" ;; - "Unknown") status="♻️" ;; - esac - capacity=$(cat "$battery/capacity") - # Will make a warn variable if discharging and low - [ "$status" = "🔋" ] && [ "$capacity" -le 25 ] && warn="❗" - # Prints the info - printf "%s%s%d%%\n" "$status" "$warn" "$capacity"; unset warn -done && return 0 diff --git a/.local/bin/statusbar/clock b/.local/bin/statusbar/clock deleted file mode 100755 index d25e8d0..0000000 --- a/.local/bin/statusbar/clock +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/sh - -clock=$(date '+%I') - -case "$clock" in - "00") icon="🕛" ;; - "01") icon="🕐" ;; - "02") icon="🕑" ;; - "03") icon="🕒" ;; - "04") icon="🕓" ;; - "05") icon="🕔" ;; - "06") icon="🕕" ;; - "07") icon="🕖" ;; - "08") icon="🕗" ;; - "09") icon="🕘" ;; - "10") icon="🕙" ;; - "11") icon="🕚" ;; - "12") icon="🕛" ;; -esac - -case $BLOCK_BUTTON in - 1) notify-send "This Month" "$(cal --color=always | sed "s/..7m//;s/..27m/<\/span><\/b>/")" && notify-send "Appointments" "$(calcurse -d3)" ;; - 2) setsid -f "$TERMINAL" -e calcurse ;; - 3) notify-send "📅 Time/date module" "\- Left click to show upcoming appointments for the next three days via \`calcurse -d3\` and show the month via \`cal\` -- Middle click opens calcurse if installed" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -date "+%Y %b %d (%a) $icon%I:%M%p" diff --git a/.local/bin/statusbar/cpu b/.local/bin/statusbar/cpu deleted file mode 100755 index 1572b52..0000000 --- a/.local/bin/statusbar/cpu +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh - -case $BLOCK_BUTTON in - 1) notify-send "🖥 CPU hogs" "$(ps axch -o cmd:15,%cpu --sort=-%cpu | head)\\n(100% per core)" ;; - 2) setsid -f "$TERMINAL" -e htop ;; - 3) notify-send "🖥 CPU module " "\- Shows CPU temperature. -- Click to show intensive processes. -- Middle click to open htop." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -sensors | awk '/Core 0/ {print "🌡" $3}' diff --git a/.local/bin/statusbar/cpubars b/.local/bin/statusbar/cpubars deleted file mode 100755 index 297424e..0000000 --- a/.local/bin/statusbar/cpubars +++ /dev/null @@ -1,44 +0,0 @@ -#!/bin/sh - -# Module showing CPU load as a changing bars. -# Just like in polybar. -# Each bar represents amount of load on one core since -# last run. - -# Cache in tmpfs to improve speed and reduce SSD load -cache=/tmp/cpubarscache - -case $BLOCK_BUTTON in - 2) setsid -f "$TERMINAL" -e htop ;; - 3) notify-send "🪨 CPU load module" "Each bar represents -one CPU core";; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -# id total idle -stats=$(awk '/cpu[0-9]+/ {printf "%d %d %d\n", substr($1,4), ($2 + $3 + $4 + $5), $5 }' /proc/stat) -[ ! -f $cache ] && echo "$stats" > "$cache" -old=$(cat "$cache") -printf "🪨" -echo "$stats" | while read -r row; do - id=${row%% *} - rest=${row#* } - total=${rest%% *} - idle=${rest##* } - - case "$(echo "$old" | awk '{if ($1 == id) - printf "%d\n", (1 - (idle - $3) / (total - $2))*100 /12.5}' \ - id="$id" total="$total" idle="$idle")" in - - "0") printf "▁";; - "1") printf "▂";; - "2") printf "▃";; - "3") printf "▄";; - "4") printf "▅";; - "5") printf "▆";; - "6") printf "▇";; - "7") printf "█";; - "8") printf "█";; - esac -done; printf "\\n" -echo "$stats" > "$cache" diff --git a/.local/bin/statusbar/crypto b/.local/bin/statusbar/crypto deleted file mode 100755 index 94ed949..0000000 --- a/.local/bin/statusbar/crypto +++ /dev/null @@ -1,54 +0,0 @@ -#!/bin/sh - -# Shows the price for desired cryptocurrencies. Module updates automatically -# every calendar day, but can also be updated with a middle click. - -# Currencies should be ;-separated: -# human-readable name;urlname;icon -coins="Bitcoin;btc;💰 -Etherium;eth;🍸 -Basic Attention Token;bat;🦁 -LBC;lbc;📚" - -# Directory where currency info is stored. -dir="${XDG_DATA_HOME:-$HOME/.local/share}/crypto-prices" - -getprices() { # The command to get the desired prices - printf "🔃 "; printprices - { rm -rf "${dir:?}/*" - echo "$coins" | while IFS=';' read -r human web icon; do - val="$(curl -s "rate.sx/1$web")" && - echo "$icon;$val;$human" > "$dir/$web" - done; [ -d "$dir" ] && touch "$dir" - pkill -RTMIN+13 "${STATUSBAR:-dwmblocks}" ;} & - exit - } - -printprices() { # Print/format all prices - for x in "$dir"/*; do - [ -f "$x" ] || break - info="$(cut -d';' -f-2 --output-delimiter=' ' "$x")" - printf "%s$%0.2f " "$info" - done | sed 's/ $/\n/' - } - -[ ! -d "$dir" ] && mkdir -p "$dir" && { getprices; exit ;} - -# If currencies haven't been updated today, try to update them. -[ "$(stat -c %x "$HOME/.local/share/crypto-prices" | cut -d' ' -f1)" != "$(date '+%Y-%m-%d')" ] && - { ping -q -c 1 example.org >/dev/null 2>&1 && getprices || exit ;} - -case $BLOCK_BUTTON in - 1) uptime="$(date -d "$(stat -c %x "$dir")" '+%D at %T' | sed "s|$(date '+%D')|Today|")" - notify-send "Exact prices in USD" "$(awk -F';' '{print $1, $3 ":\n\t$" $2}' "$dir"/*) -Last updated: - $uptime" ;; - 2) getprices ;; - 3) notify-send "💸 Crypto-currency module" "\- Left click for exact prices. -- Middle click to update. -- Shows 🔃 if updating prices. -- Manually add/remove currencies to list in the script." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -printprices diff --git a/.local/bin/statusbar/disk b/.local/bin/statusbar/disk deleted file mode 100755 index e947509..0000000 --- a/.local/bin/statusbar/disk +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh - -# Status bar module for disk space -# $1 should be drive mountpoint, otherwise assumed /. - -location=${1:-/} - -[ -d "$location" ] || exit - -case $BLOCK_BUTTON in - 1) notify-send "💽 Disk space" "$(df -h --output=target,used,size)" ;; - 3) notify-send "💽 Disk module" "\- Shows used hard drive space. -- Click to show all disk info." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -case "$location" in - "/home"* ) icon="🏠" ;; - "/mnt"* ) icon="💾" ;; - *) icon="🖥";; -esac - -printf "%s: %s\n" "$icon" "$(df -h "$location" | awk ' /[0-9]/ {print $3 "/" $2}')" diff --git a/.local/bin/statusbar/forecast b/.local/bin/statusbar/forecast deleted file mode 100755 index 6652edd..0000000 --- a/.local/bin/statusbar/forecast +++ /dev/null @@ -1,35 +0,0 @@ -#!/bin/sh - -# Displays todays precipication chance (☔) and daily low (🥶) and high (🌞). -# Usually intended for the statusbar. - -# If we have internet, get a weather report from wttr.in and store it locally. -# You could set up a shell alias to view the full file in a pager in the -# terminal if desired. This function will only be run once a day when needed. -weatherreport="${XDG_DATA_HOME:-$HOME/.local/share}/weatherreport" -getforecast() { curl -sf "wttr.in/$LOCATION" > "$weatherreport" || exit 1 ;} - -# Some very particular and terse stream manipulation. We get the maximum -# precipitation chance and the daily high and low from the downloaded file and -# display them with coresponding emojis. -showweather() { printf "%s" "$(sed '16q;d' "$weatherreport" | - grep -wo "[0-9]*%" | sort -rn | sed "s/^/☔/g;1q" | tr -d '\n')" -sed '13q;d' "$weatherreport" | grep -o "m\\([-+]\\)*[0-9]\\+" | sort -n -t 'm' -k 2n | sed -e 1b -e '$!d' | tr '\n|m' ' ' | awk '{print " 🥶" $1 "°","🌞" $2 "°"}' ;} - -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e less -Srf "$weatherreport" ;; - 2) getforecast && showweather ;; - 3) notify-send "🌈 Weather module" "\- Left click for full forecast. -- Middle click to update forecast. -☔: Chance of rain/snow -🥶: Daily low -🌞: Daily high" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -# The test if our forcecast is updated to the day. If it isn't download a new -# weather report from wttr.in with the above function. -[ "$(stat -c %y "$weatherreport" 2>/dev/null | cut -d' ' -f1)" = "$(date '+%Y-%m-%d')" ] || - getforecast - -showweather diff --git a/.local/bin/statusbar/help-icon b/.local/bin/statusbar/help-icon deleted file mode 100755 index 8fa4a52..0000000 --- a/.local/bin/statusbar/help-icon +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -# The clickable help menu. Middle click to restart wm. - -# If dwm is running, use dwm's readme and restart. -pidof dwm >/dev/null && - READMEFILE=/usr/local/share/dwm/larbs.mom - restartwm() { pkill -HUP dwm ;} || - restartwm() { i3 restart ;} - -case $BLOCK_BUTTON in - 1) groff -mom "${READMEFILE:-${XDG_DATA_HOME:-$HOME/.local/share}/larbs/readme.mom}" -Tpdf | zathura - ;; - 2) restartwm ;; - 3) notify-send "❓ Help module" "\- Left click to open LARBS guide. -- Middle click to refresh window manager." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac; echo "❓" diff --git a/.local/bin/statusbar/internet b/.local/bin/statusbar/internet deleted file mode 100755 index ee1a160..0000000 --- a/.local/bin/statusbar/internet +++ /dev/null @@ -1,24 +0,0 @@ -#!/bin/sh - -# Show wifi 📶 and percent strength or 📡 if none. -# Show 🌐 if connected to ethernet or ❎ if none. -# Show 🔒 if a vpn connection is active - -case $BLOCK_BUTTON in - 1) "$TERMINAL" -e nmtui; pkill -RTMIN+4 dwmblocks ;; - 3) notify-send "🌐 Internet module" "\- Click to connect -📡: no wifi connection -📶: wifi connection with quality -❎: no ethernet -🌐: ethernet working -🔒: vpn is active -" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -case "$(cat /sys/class/net/w*/operstate 2>/dev/null)" in - down) wifiicon="📡 " ;; - up) wifiicon="$(awk '/^\s*w/ { print "📶", int($3 * 100 / 70) "% " }' /proc/net/wireless)" ;; -esac - -printf "%s%s%s\n" "$wifiicon" "$(sed "s/down/❎/;s/up/🌐/" /sys/class/net/e*/operstate 2>/dev/null)" "$(sed "s/.*/🔒/" /sys/class/net/tun*/operstate 2>/dev/null)" diff --git a/.local/bin/statusbar/iplocate b/.local/bin/statusbar/iplocate deleted file mode 100755 index 02adab8..0000000 --- a/.local/bin/statusbar/iplocate +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -# Gets your public ip address checks which country you are in and -# displays that information in the statusbar -# -# https://www.maketecheasier.com/ip-address-geolocation-lookups-linux/ - -ifinstalled "geoip" || exit -addr="$(curl ifconfig.me 2>/dev/null)" || exit -grep "flag: " "${XDG_DATA_HOME:-$HOME/.local/share}/larbs/emoji" | grep "$(geoiplookup "$addr" | sed 's/.*, //')" | sed "s/flag: //;s/;.*//" diff --git a/.local/bin/statusbar/kbselect b/.local/bin/statusbar/kbselect deleted file mode 100755 index f0c923f..0000000 --- a/.local/bin/statusbar/kbselect +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh -# works on any init system -# requirements: dmenu, xorg-setxkbmap -kb="$(setxkbmap -query | grep -oP 'layout:\s*\K\w+')" || exit 1 - -case $BLOCK_BUTTON in - 1) kb_choice="$(awk '/! layout/{flag=1; next} /! variant/{flag=0} flag {print $2, "- " $1}' /usr/share/X11/xkb/rules/base.lst | dmenu -l 15)" - kb="$(echo "$kb_choice" | awk '{print $3}')" - setxkbmap "$kb" - pkill -RTMIN+30 "${STATUSBAR:-dwmblocks}";; - 3) notify-send "⌨ Keyboard/language module" "$(printf "%s" "\- Current layout: $(setxkbmap -query | grep -oP 'layout:\s*\K\w+')") -- Left click to change keyboard.";; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -echo "$kb" diff --git a/.local/bin/statusbar/mailbox b/.local/bin/statusbar/mailbox deleted file mode 100755 index 5a67428..0000000 --- a/.local/bin/statusbar/mailbox +++ /dev/null @@ -1,20 +0,0 @@ -#!/bin/sh - -# Displays number of unread mail and an loading icon if updating. -# When clicked, brings up `neomutt`. - -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e neomutt ;; - 2) setsid -f mw sync >/dev/null ;; - 3) notify-send "📬 Mail module" "\- Shows unread mail -- Shows 🔃 if syncing mail -- Left click opens neomutt -- Middle click syncs mail" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -unread="$(find "${XDG_DATA_HOME:-$HOME/.local/share}"/mail/*/[Ii][Nn][Bb][Oo][Xx]/new/* -type f | wc -l 2>/dev/null)" - -pidof mbsync >/dev/null 2>&1 && icon="🔃" - -[ "$unread" = "0" ] && [ "$icon" = "" ] || echo "📬$unread$icon" diff --git a/.local/bin/statusbar/memory b/.local/bin/statusbar/memory deleted file mode 100755 index 01d3daf..0000000 --- a/.local/bin/statusbar/memory +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh - -case $BLOCK_BUTTON in - 1) notify-send "🧠 Memory hogs" "$(ps axch -o cmd:15,%mem --sort=-%mem | head)" ;; - 2) setsid -f "$TERMINAL" -e htop ;; - 3) notify-send "🧠 Memory module" "\- Shows Memory Used/Total. -- Click to show memory hogs. -- Middle click to open htop." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -free --mebi | sed -n '2{p;q}' | awk '{printf ("🧠%2.2fGiB/%2.2fGiB\n", ( $3 / 1024), ($2 / 1024))}' diff --git a/.local/bin/statusbar/moonphase b/.local/bin/statusbar/moonphase deleted file mode 100755 index fab8b4d..0000000 --- a/.local/bin/statusbar/moonphase +++ /dev/null @@ -1,37 +0,0 @@ -#!/bin/sh - -# Shows the current moon phase. - -moonfile="${XDG_DATA_HOME:-$HOME/.local/share}/moonphase" - -[ "$(stat -c %y "$moonfile" 2>/dev/null | cut -d' ' -f1)" = "$(date '+%Y-%m-%d')" ] || - { curl -sf "wttr.in/?format=%m" > "$moonfile" || exit 1 ;} - -icon="$(cat "$moonfile")" - -case "$icon" in - 🌑) name="New" ;; - 🌒) name="Waxing Crescent" ;; - 🌓) name="First Quarter" ;; - 🌔) name="Waxing Gibbous" ;; - 🌕) name="Full" ;; - 🌖) name="Waning Gibbous" ;; - 🌗) name="Last Quarter" ;; - 🌘) name="Waning Crescent" ;; - *) exit 1 ;; -esac - -echo "${icon-?}" - -case $BLOCK_BUTTON in - 3) notify-send "🌜 Moon phase module" "Displays current moon phase. -- 🌑: New -- 🌒: Waxing Crescent -- 🌓: First Quarter -- 🌔: Waxing Gibbous -- 🌕: Full -- 🌖: Waning Gibbous -- 🌗: Last Quarter -- 🌘: Waning Crescent" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac diff --git a/.local/bin/statusbar/mpdup b/.local/bin/statusbar/mpdup deleted file mode 100755 index af81a7d..0000000 --- a/.local/bin/statusbar/mpdup +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/sh - -# This loop will update the mpd statusbar module whenever a command changes the -# music player's status. mpd must be running on X's start for this to work. - -while : ; do - mpc idle >/dev/null && kill -45 "$(pidof "${STATUSBAR:-dwmblocks}")" || break -done diff --git a/.local/bin/statusbar/music b/.local/bin/statusbar/music deleted file mode 100755 index 4b7c115..0000000 --- a/.local/bin/statusbar/music +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh - -filter() { mpc | sed "/^volume:/d;s/\\&/&/g;s/\\[paused\\].*/⏸/g;/\\[playing\\].*/d" | paste -sd ' ' -;} - -pidof -x mpdup >/dev/null 2>&1 || mpdup >/dev/null 2>&1 & - -case $BLOCK_BUTTON in - 1) mpc status | filter ; setsid -f "$TERMINAL" -e ncmpcpp ;; # right click, pause/unpause - 2) mpc toggle | filter ;; # right click, pause/unpause - 3) mpc status | filter ; notify-send "🎵 Music module" "\- Shows mpd song playing. -- ⏸ when paused. -- Left click opens ncmpcpp. -- Middle click pauses. -- Scroll changes track.";; # right click, pause/unpause - 4) mpc prev | filter ;; # scroll up, previous - 5) mpc next | filter ;; # scroll down, next - 6) mpc status | filter ; "$TERMINAL" -e "$EDITOR" "$0" ;; - *) mpc status | filter ;; -esac diff --git a/.local/bin/statusbar/nettraf b/.local/bin/statusbar/nettraf deleted file mode 100755 index eb7a73b..0000000 --- a/.local/bin/statusbar/nettraf +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/sh - -# Module showing network traffic. Shows how much data has been received (RX) or -# transmitted (TX) since the previous time this script ran. So if run every -# second, gives network traffic per second. - -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e bmon ;; - 3) notify-send "🌐 Network traffic module" "🔻: Traffic received -🔺: Traffic transmitted" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -update() { - sum=0 - for arg; do - read -r i < "$arg" - sum=$(( sum + i )) - done - cache=${XDG_CACHE_HOME:-$HOME/.cache}/${1##*/} - [ -f "$cache" ] && read -r old < "$cache" || old=0 - printf %d\\n "$sum" > "$cache" - printf %d\\n $(( sum - old )) -} - -rx=$(update /sys/class/net/[ew]*/statistics/rx_bytes) -tx=$(update /sys/class/net/[ew]*/statistics/tx_bytes) - -printf "🔻%4sB 🔺%4sB\\n" $(numfmt --to=iec $rx) $(numfmt --to=iec $tx) diff --git a/.local/bin/statusbar/news b/.local/bin/statusbar/news deleted file mode 100755 index fe701db..0000000 --- a/.local/bin/statusbar/news +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -# Displays number of unread news items and an loading icon if updating. -# When clicked, brings up `newsboat`. - -case $BLOCK_BUTTON in - 1) setsid "$TERMINAL" -e newsboat ;; - 2) setsid -f newsup >/dev/null exit ;; - 3) notify-send "📰 News module" "\- Shows unread news items -- Shows 🔃 if updating with \`newsup\` -- Left click opens newsboat -- Middle click syncs RSS feeds -Note: Only one instance of newsboat (including updates) may be running at a time." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - - cat /tmp/newsupdate 2>/dev/null || echo "$(newsboat -x print-unread | awk '{ if($1>0) print "📰" $1}')$(cat "${XDG_CONFIG_HOME:-$HOME/.config}"/newsboat/.update 2>/dev/null)" diff --git a/.local/bin/statusbar/pacpackages b/.local/bin/statusbar/pacpackages deleted file mode 100755 index a9b6cf7..0000000 --- a/.local/bin/statusbar/pacpackages +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/sh - -# Displays number of upgradeable packages. -# For this to work, have a `pacman -Sy` command run in the background as a -# cronjob every so often as root. This script will then read those packages. -# When clicked, it will run an upgrade via pacman. -# -# Add the following text as a file in /usr/share/libalpm/hooks/statusbar.hook: -# -# [Trigger] -# Operation = Upgrade -# Type = Package -# Target = * -# -# [Action] -# Description = Updating statusbar... -# When = PostTransaction -# Exec = /usr/bin/pkill -RTMIN+8 dwmblocks # Or i3blocks if using i3. - -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e popupgrade ;; - 2) notify-send "$(/usr/bin/pacman -Qu)" ;; - 3) notify-send "🎁 Upgrade module" "📦: number of upgradable packages -- Left click to upgrade packages -- Middle click to show upgradable packages" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -pacman -Qu | grep -Fcv "[ignored]" | sed "s/^/📦/;s/^📦0$//g" diff --git a/.local/bin/statusbar/popupgrade b/.local/bin/statusbar/popupgrade deleted file mode 100755 index 29d6230..0000000 --- a/.local/bin/statusbar/popupgrade +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/sh - -printf "Beginning upgrade.\\n" - -yay -Syu -pkill -RTMIN+8 "${STATUSBAR:-dwmblocks}" - -printf "\\nUpgrade complete.\\nPress to exit window.\\n\\n" -read -r _ diff --git a/.local/bin/statusbar/price b/.local/bin/statusbar/price deleted file mode 100755 index 45b01ad..0000000 --- a/.local/bin/statusbar/price +++ /dev/null @@ -1,38 +0,0 @@ -#!/bin/sh - -# Usage: -# price -# price bat "Basic Attention Token" 🦁 -# When the name of the currency is multi-word, put it in quotes. - -[ -z "$3" ] && exit 1 -interval="@14d" # History contained in chart preceded by '@' (7d = 7 days) -dir="${XDG_DATA_HOME:-$HOME/.local/share}/crypto-prices" -pricefile="$dir/$1" -chartfile="$dir/$1-chart" - -updateprice() { ping -q -c 1 example.org >/dev/null 2>&1 && - curl -s "rate.sx/1$1" > "$pricefile" && - curl -s "rate.sx/$1$interval" > "$chartfile" ;} - -[ -d "$dir" ] || mkdir -p "$dir" - -[ "$(stat -c %x "$pricefile" 2>/dev/null | cut -d' ' -f1)" != "$(date '+%Y-%m-%d')" ] && - updateprice "$1" - -case $BLOCK_BUTTON in - 1) setsid "$TERMINAL" -e less -Sf "$chartfile" ;; - 2) notify-send -u low "$3 Updating..." "Updating $2 price..." - updateprice "$1" && notify-send "$3 Update complete." "$2 price is now -\$$(cat "$pricefile")" ;; - 3) uptime="$(date -d "$(stat -c %x "$pricefile")" '+%D at %T' | sed "s|$(date '+%D')|Today|")" - notify-send "$3 $2 module" "\- Exact price: \$$(cat "$pricefile") -- Left click for chart of changes. -- Middle click to update. -- Shows 🔃 if updating prices. -- Last updated: - $uptime" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -printf "$3$%0.2f" "$(cat "$pricefile")" diff --git a/.local/bin/statusbar/sb-battery b/.local/bin/statusbar/sb-battery new file mode 100755 index 0000000..d0272ec --- /dev/null +++ b/.local/bin/statusbar/sb-battery @@ -0,0 +1,39 @@ +#!/bin/sh + +# Prints all batteries, their percentage remaining and an emoji corresponding +# to charge status (🔌 for plugged up, 🔋 for discharging on battery, etc.). + +case $BLOCK_BUTTON in + 3) notify-send "🔋 Battery module" "🔋: discharging +🛑: not charging +♻: stagnant charge +🔌: charging +⚡: charged +❗: battery very low! +- Scroll to change adjust xbacklight." ;; + 4) xbacklight -inc 10 ;; + 5) xbacklight -dec 10 ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +# Check if battery directories are detected +[ ! -e /sys/class/power_supply/BAT?* ] && echo "No battery found" && exit 1 + +# Loop through all attached batteries and format the info +for battery in /sys/class/power_supply/BAT?* +do + # Sets up the status and capacity + status=$(cat "$battery/status") + case "$status" in + "Full") status="⚡" ;; + "Discharging") status="🔋" ;; + "Charging") status="🔌" ;; + "Not charging") status="🛑" ;; + "Unknown") status="♻️" ;; + esac + capacity=$(cat "$battery/capacity") + # Will make a warn variable if discharging and low + [ "$status" = "🔋" ] && [ "$capacity" -le 25 ] && warn="❗" + # Prints the info + printf "%s%s%d%%\n" "$status" "$warn" "$capacity"; unset warn +done && return 0 diff --git a/.local/bin/statusbar/sb-clock b/.local/bin/statusbar/sb-clock new file mode 100755 index 0000000..d25e8d0 --- /dev/null +++ b/.local/bin/statusbar/sb-clock @@ -0,0 +1,29 @@ +#!/bin/sh + +clock=$(date '+%I') + +case "$clock" in + "00") icon="🕛" ;; + "01") icon="🕐" ;; + "02") icon="🕑" ;; + "03") icon="🕒" ;; + "04") icon="🕓" ;; + "05") icon="🕔" ;; + "06") icon="🕕" ;; + "07") icon="🕖" ;; + "08") icon="🕗" ;; + "09") icon="🕘" ;; + "10") icon="🕙" ;; + "11") icon="🕚" ;; + "12") icon="🕛" ;; +esac + +case $BLOCK_BUTTON in + 1) notify-send "This Month" "$(cal --color=always | sed "s/..7m//;s/..27m/<\/span><\/b>/")" && notify-send "Appointments" "$(calcurse -d3)" ;; + 2) setsid -f "$TERMINAL" -e calcurse ;; + 3) notify-send "📅 Time/date module" "\- Left click to show upcoming appointments for the next three days via \`calcurse -d3\` and show the month via \`cal\` +- Middle click opens calcurse if installed" ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +date "+%Y %b %d (%a) $icon%I:%M%p" diff --git a/.local/bin/statusbar/sb-cpu b/.local/bin/statusbar/sb-cpu new file mode 100755 index 0000000..1572b52 --- /dev/null +++ b/.local/bin/statusbar/sb-cpu @@ -0,0 +1,12 @@ +#!/bin/sh + +case $BLOCK_BUTTON in + 1) notify-send "🖥 CPU hogs" "$(ps axch -o cmd:15,%cpu --sort=-%cpu | head)\\n(100% per core)" ;; + 2) setsid -f "$TERMINAL" -e htop ;; + 3) notify-send "🖥 CPU module " "\- Shows CPU temperature. +- Click to show intensive processes. +- Middle click to open htop." ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +sensors | awk '/Core 0/ {print "🌡" $3}' diff --git a/.local/bin/statusbar/sb-cpubars b/.local/bin/statusbar/sb-cpubars new file mode 100755 index 0000000..297424e --- /dev/null +++ b/.local/bin/statusbar/sb-cpubars @@ -0,0 +1,44 @@ +#!/bin/sh + +# Module showing CPU load as a changing bars. +# Just like in polybar. +# Each bar represents amount of load on one core since +# last run. + +# Cache in tmpfs to improve speed and reduce SSD load +cache=/tmp/cpubarscache + +case $BLOCK_BUTTON in + 2) setsid -f "$TERMINAL" -e htop ;; + 3) notify-send "🪨 CPU load module" "Each bar represents +one CPU core";; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +# id total idle +stats=$(awk '/cpu[0-9]+/ {printf "%d %d %d\n", substr($1,4), ($2 + $3 + $4 + $5), $5 }' /proc/stat) +[ ! -f $cache ] && echo "$stats" > "$cache" +old=$(cat "$cache") +printf "🪨" +echo "$stats" | while read -r row; do + id=${row%% *} + rest=${row#* } + total=${rest%% *} + idle=${rest##* } + + case "$(echo "$old" | awk '{if ($1 == id) + printf "%d\n", (1 - (idle - $3) / (total - $2))*100 /12.5}' \ + id="$id" total="$total" idle="$idle")" in + + "0") printf "▁";; + "1") printf "▂";; + "2") printf "▃";; + "3") printf "▄";; + "4") printf "▅";; + "5") printf "▆";; + "6") printf "▇";; + "7") printf "█";; + "8") printf "█";; + esac +done; printf "\\n" +echo "$stats" > "$cache" diff --git a/.local/bin/statusbar/sb-crypto b/.local/bin/statusbar/sb-crypto new file mode 100755 index 0000000..94ed949 --- /dev/null +++ b/.local/bin/statusbar/sb-crypto @@ -0,0 +1,54 @@ +#!/bin/sh + +# Shows the price for desired cryptocurrencies. Module updates automatically +# every calendar day, but can also be updated with a middle click. + +# Currencies should be ;-separated: +# human-readable name;urlname;icon +coins="Bitcoin;btc;💰 +Etherium;eth;🍸 +Basic Attention Token;bat;🦁 +LBC;lbc;📚" + +# Directory where currency info is stored. +dir="${XDG_DATA_HOME:-$HOME/.local/share}/crypto-prices" + +getprices() { # The command to get the desired prices + printf "🔃 "; printprices + { rm -rf "${dir:?}/*" + echo "$coins" | while IFS=';' read -r human web icon; do + val="$(curl -s "rate.sx/1$web")" && + echo "$icon;$val;$human" > "$dir/$web" + done; [ -d "$dir" ] && touch "$dir" + pkill -RTMIN+13 "${STATUSBAR:-dwmblocks}" ;} & + exit + } + +printprices() { # Print/format all prices + for x in "$dir"/*; do + [ -f "$x" ] || break + info="$(cut -d';' -f-2 --output-delimiter=' ' "$x")" + printf "%s$%0.2f " "$info" + done | sed 's/ $/\n/' + } + +[ ! -d "$dir" ] && mkdir -p "$dir" && { getprices; exit ;} + +# If currencies haven't been updated today, try to update them. +[ "$(stat -c %x "$HOME/.local/share/crypto-prices" | cut -d' ' -f1)" != "$(date '+%Y-%m-%d')" ] && + { ping -q -c 1 example.org >/dev/null 2>&1 && getprices || exit ;} + +case $BLOCK_BUTTON in + 1) uptime="$(date -d "$(stat -c %x "$dir")" '+%D at %T' | sed "s|$(date '+%D')|Today|")" + notify-send "Exact prices in USD" "$(awk -F';' '{print $1, $3 ":\n\t$" $2}' "$dir"/*) +Last updated: + $uptime" ;; + 2) getprices ;; + 3) notify-send "💸 Crypto-currency module" "\- Left click for exact prices. +- Middle click to update. +- Shows 🔃 if updating prices. +- Manually add/remove currencies to list in the script." ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +printprices diff --git a/.local/bin/statusbar/sb-disk b/.local/bin/statusbar/sb-disk new file mode 100755 index 0000000..e947509 --- /dev/null +++ b/.local/bin/statusbar/sb-disk @@ -0,0 +1,23 @@ +#!/bin/sh + +# Status bar module for disk space +# $1 should be drive mountpoint, otherwise assumed /. + +location=${1:-/} + +[ -d "$location" ] || exit + +case $BLOCK_BUTTON in + 1) notify-send "💽 Disk space" "$(df -h --output=target,used,size)" ;; + 3) notify-send "💽 Disk module" "\- Shows used hard drive space. +- Click to show all disk info." ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +case "$location" in + "/home"* ) icon="🏠" ;; + "/mnt"* ) icon="💾" ;; + *) icon="🖥";; +esac + +printf "%s: %s\n" "$icon" "$(df -h "$location" | awk ' /[0-9]/ {print $3 "/" $2}')" diff --git a/.local/bin/statusbar/sb-forecast b/.local/bin/statusbar/sb-forecast new file mode 100755 index 0000000..6652edd --- /dev/null +++ b/.local/bin/statusbar/sb-forecast @@ -0,0 +1,35 @@ +#!/bin/sh + +# Displays todays precipication chance (☔) and daily low (🥶) and high (🌞). +# Usually intended for the statusbar. + +# If we have internet, get a weather report from wttr.in and store it locally. +# You could set up a shell alias to view the full file in a pager in the +# terminal if desired. This function will only be run once a day when needed. +weatherreport="${XDG_DATA_HOME:-$HOME/.local/share}/weatherreport" +getforecast() { curl -sf "wttr.in/$LOCATION" > "$weatherreport" || exit 1 ;} + +# Some very particular and terse stream manipulation. We get the maximum +# precipitation chance and the daily high and low from the downloaded file and +# display them with coresponding emojis. +showweather() { printf "%s" "$(sed '16q;d' "$weatherreport" | + grep -wo "[0-9]*%" | sort -rn | sed "s/^/☔/g;1q" | tr -d '\n')" +sed '13q;d' "$weatherreport" | grep -o "m\\([-+]\\)*[0-9]\\+" | sort -n -t 'm' -k 2n | sed -e 1b -e '$!d' | tr '\n|m' ' ' | awk '{print " 🥶" $1 "°","🌞" $2 "°"}' ;} + +case $BLOCK_BUTTON in + 1) setsid -f "$TERMINAL" -e less -Srf "$weatherreport" ;; + 2) getforecast && showweather ;; + 3) notify-send "🌈 Weather module" "\- Left click for full forecast. +- Middle click to update forecast. +☔: Chance of rain/snow +🥶: Daily low +🌞: Daily high" ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +# The test if our forcecast is updated to the day. If it isn't download a new +# weather report from wttr.in with the above function. +[ "$(stat -c %y "$weatherreport" 2>/dev/null | cut -d' ' -f1)" = "$(date '+%Y-%m-%d')" ] || + getforecast + +showweather diff --git a/.local/bin/statusbar/sb-help-icon b/.local/bin/statusbar/sb-help-icon new file mode 100755 index 0000000..8fa4a52 --- /dev/null +++ b/.local/bin/statusbar/sb-help-icon @@ -0,0 +1,17 @@ +#!/bin/sh + +# The clickable help menu. Middle click to restart wm. + +# If dwm is running, use dwm's readme and restart. +pidof dwm >/dev/null && + READMEFILE=/usr/local/share/dwm/larbs.mom + restartwm() { pkill -HUP dwm ;} || + restartwm() { i3 restart ;} + +case $BLOCK_BUTTON in + 1) groff -mom "${READMEFILE:-${XDG_DATA_HOME:-$HOME/.local/share}/larbs/readme.mom}" -Tpdf | zathura - ;; + 2) restartwm ;; + 3) notify-send "❓ Help module" "\- Left click to open LARBS guide. +- Middle click to refresh window manager." ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac; echo "❓" diff --git a/.local/bin/statusbar/sb-internet b/.local/bin/statusbar/sb-internet new file mode 100755 index 0000000..ee1a160 --- /dev/null +++ b/.local/bin/statusbar/sb-internet @@ -0,0 +1,24 @@ +#!/bin/sh + +# Show wifi 📶 and percent strength or 📡 if none. +# Show 🌐 if connected to ethernet or ❎ if none. +# Show 🔒 if a vpn connection is active + +case $BLOCK_BUTTON in + 1) "$TERMINAL" -e nmtui; pkill -RTMIN+4 dwmblocks ;; + 3) notify-send "🌐 Internet module" "\- Click to connect +📡: no wifi connection +📶: wifi connection with quality +❎: no ethernet +🌐: ethernet working +🔒: vpn is active +" ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +case "$(cat /sys/class/net/w*/operstate 2>/dev/null)" in + down) wifiicon="📡 " ;; + up) wifiicon="$(awk '/^\s*w/ { print "📶", int($3 * 100 / 70) "% " }' /proc/net/wireless)" ;; +esac + +printf "%s%s%s\n" "$wifiicon" "$(sed "s/down/❎/;s/up/🌐/" /sys/class/net/e*/operstate 2>/dev/null)" "$(sed "s/.*/🔒/" /sys/class/net/tun*/operstate 2>/dev/null)" diff --git a/.local/bin/statusbar/sb-iplocate b/.local/bin/statusbar/sb-iplocate new file mode 100755 index 0000000..02adab8 --- /dev/null +++ b/.local/bin/statusbar/sb-iplocate @@ -0,0 +1,10 @@ +#!/bin/sh + +# Gets your public ip address checks which country you are in and +# displays that information in the statusbar +# +# https://www.maketecheasier.com/ip-address-geolocation-lookups-linux/ + +ifinstalled "geoip" || exit +addr="$(curl ifconfig.me 2>/dev/null)" || exit +grep "flag: " "${XDG_DATA_HOME:-$HOME/.local/share}/larbs/emoji" | grep "$(geoiplookup "$addr" | sed 's/.*, //')" | sed "s/flag: //;s/;.*//" diff --git a/.local/bin/statusbar/sb-kbselect b/.local/bin/statusbar/sb-kbselect new file mode 100755 index 0000000..f0c923f --- /dev/null +++ b/.local/bin/statusbar/sb-kbselect @@ -0,0 +1,16 @@ +#!/bin/sh +# works on any init system +# requirements: dmenu, xorg-setxkbmap +kb="$(setxkbmap -query | grep -oP 'layout:\s*\K\w+')" || exit 1 + +case $BLOCK_BUTTON in + 1) kb_choice="$(awk '/! layout/{flag=1; next} /! variant/{flag=0} flag {print $2, "- " $1}' /usr/share/X11/xkb/rules/base.lst | dmenu -l 15)" + kb="$(echo "$kb_choice" | awk '{print $3}')" + setxkbmap "$kb" + pkill -RTMIN+30 "${STATUSBAR:-dwmblocks}";; + 3) notify-send "⌨ Keyboard/language module" "$(printf "%s" "\- Current layout: $(setxkbmap -query | grep -oP 'layout:\s*\K\w+')") +- Left click to change keyboard.";; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +echo "$kb" diff --git a/.local/bin/statusbar/sb-mailbox b/.local/bin/statusbar/sb-mailbox new file mode 100755 index 0000000..5a67428 --- /dev/null +++ b/.local/bin/statusbar/sb-mailbox @@ -0,0 +1,20 @@ +#!/bin/sh + +# Displays number of unread mail and an loading icon if updating. +# When clicked, brings up `neomutt`. + +case $BLOCK_BUTTON in + 1) setsid -f "$TERMINAL" -e neomutt ;; + 2) setsid -f mw sync >/dev/null ;; + 3) notify-send "📬 Mail module" "\- Shows unread mail +- Shows 🔃 if syncing mail +- Left click opens neomutt +- Middle click syncs mail" ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +unread="$(find "${XDG_DATA_HOME:-$HOME/.local/share}"/mail/*/[Ii][Nn][Bb][Oo][Xx]/new/* -type f | wc -l 2>/dev/null)" + +pidof mbsync >/dev/null 2>&1 && icon="🔃" + +[ "$unread" = "0" ] && [ "$icon" = "" ] || echo "📬$unread$icon" diff --git a/.local/bin/statusbar/sb-memory b/.local/bin/statusbar/sb-memory new file mode 100755 index 0000000..01d3daf --- /dev/null +++ b/.local/bin/statusbar/sb-memory @@ -0,0 +1,12 @@ +#!/bin/sh + +case $BLOCK_BUTTON in + 1) notify-send "🧠 Memory hogs" "$(ps axch -o cmd:15,%mem --sort=-%mem | head)" ;; + 2) setsid -f "$TERMINAL" -e htop ;; + 3) notify-send "🧠 Memory module" "\- Shows Memory Used/Total. +- Click to show memory hogs. +- Middle click to open htop." ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +free --mebi | sed -n '2{p;q}' | awk '{printf ("🧠%2.2fGiB/%2.2fGiB\n", ( $3 / 1024), ($2 / 1024))}' diff --git a/.local/bin/statusbar/sb-moonphase b/.local/bin/statusbar/sb-moonphase new file mode 100755 index 0000000..fab8b4d --- /dev/null +++ b/.local/bin/statusbar/sb-moonphase @@ -0,0 +1,37 @@ +#!/bin/sh + +# Shows the current moon phase. + +moonfile="${XDG_DATA_HOME:-$HOME/.local/share}/moonphase" + +[ "$(stat -c %y "$moonfile" 2>/dev/null | cut -d' ' -f1)" = "$(date '+%Y-%m-%d')" ] || + { curl -sf "wttr.in/?format=%m" > "$moonfile" || exit 1 ;} + +icon="$(cat "$moonfile")" + +case "$icon" in + 🌑) name="New" ;; + 🌒) name="Waxing Crescent" ;; + 🌓) name="First Quarter" ;; + 🌔) name="Waxing Gibbous" ;; + 🌕) name="Full" ;; + 🌖) name="Waning Gibbous" ;; + 🌗) name="Last Quarter" ;; + 🌘) name="Waning Crescent" ;; + *) exit 1 ;; +esac + +echo "${icon-?}" + +case $BLOCK_BUTTON in + 3) notify-send "🌜 Moon phase module" "Displays current moon phase. +- 🌑: New +- 🌒: Waxing Crescent +- 🌓: First Quarter +- 🌔: Waxing Gibbous +- 🌕: Full +- 🌖: Waning Gibbous +- 🌗: Last Quarter +- 🌘: Waning Crescent" ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac diff --git a/.local/bin/statusbar/sb-mpdup b/.local/bin/statusbar/sb-mpdup new file mode 100755 index 0000000..af81a7d --- /dev/null +++ b/.local/bin/statusbar/sb-mpdup @@ -0,0 +1,8 @@ +#!/bin/sh + +# This loop will update the mpd statusbar module whenever a command changes the +# music player's status. mpd must be running on X's start for this to work. + +while : ; do + mpc idle >/dev/null && kill -45 "$(pidof "${STATUSBAR:-dwmblocks}")" || break +done diff --git a/.local/bin/statusbar/sb-music b/.local/bin/statusbar/sb-music new file mode 100755 index 0000000..4b7c115 --- /dev/null +++ b/.local/bin/statusbar/sb-music @@ -0,0 +1,19 @@ +#!/bin/sh + +filter() { mpc | sed "/^volume:/d;s/\\&/&/g;s/\\[paused\\].*/⏸/g;/\\[playing\\].*/d" | paste -sd ' ' -;} + +pidof -x mpdup >/dev/null 2>&1 || mpdup >/dev/null 2>&1 & + +case $BLOCK_BUTTON in + 1) mpc status | filter ; setsid -f "$TERMINAL" -e ncmpcpp ;; # right click, pause/unpause + 2) mpc toggle | filter ;; # right click, pause/unpause + 3) mpc status | filter ; notify-send "🎵 Music module" "\- Shows mpd song playing. +- ⏸ when paused. +- Left click opens ncmpcpp. +- Middle click pauses. +- Scroll changes track.";; # right click, pause/unpause + 4) mpc prev | filter ;; # scroll up, previous + 5) mpc next | filter ;; # scroll down, next + 6) mpc status | filter ; "$TERMINAL" -e "$EDITOR" "$0" ;; + *) mpc status | filter ;; +esac diff --git a/.local/bin/statusbar/sb-nettraf b/.local/bin/statusbar/sb-nettraf new file mode 100755 index 0000000..eb7a73b --- /dev/null +++ b/.local/bin/statusbar/sb-nettraf @@ -0,0 +1,29 @@ +#!/bin/sh + +# Module showing network traffic. Shows how much data has been received (RX) or +# transmitted (TX) since the previous time this script ran. So if run every +# second, gives network traffic per second. + +case $BLOCK_BUTTON in + 1) setsid -f "$TERMINAL" -e bmon ;; + 3) notify-send "🌐 Network traffic module" "🔻: Traffic received +🔺: Traffic transmitted" ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +update() { + sum=0 + for arg; do + read -r i < "$arg" + sum=$(( sum + i )) + done + cache=${XDG_CACHE_HOME:-$HOME/.cache}/${1##*/} + [ -f "$cache" ] && read -r old < "$cache" || old=0 + printf %d\\n "$sum" > "$cache" + printf %d\\n $(( sum - old )) +} + +rx=$(update /sys/class/net/[ew]*/statistics/rx_bytes) +tx=$(update /sys/class/net/[ew]*/statistics/tx_bytes) + +printf "🔻%4sB 🔺%4sB\\n" $(numfmt --to=iec $rx) $(numfmt --to=iec $tx) diff --git a/.local/bin/statusbar/sb-news b/.local/bin/statusbar/sb-news new file mode 100755 index 0000000..fe701db --- /dev/null +++ b/.local/bin/statusbar/sb-news @@ -0,0 +1,17 @@ +#!/bin/sh + +# Displays number of unread news items and an loading icon if updating. +# When clicked, brings up `newsboat`. + +case $BLOCK_BUTTON in + 1) setsid "$TERMINAL" -e newsboat ;; + 2) setsid -f newsup >/dev/null exit ;; + 3) notify-send "📰 News module" "\- Shows unread news items +- Shows 🔃 if updating with \`newsup\` +- Left click opens newsboat +- Middle click syncs RSS feeds +Note: Only one instance of newsboat (including updates) may be running at a time." ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + + cat /tmp/newsupdate 2>/dev/null || echo "$(newsboat -x print-unread | awk '{ if($1>0) print "📰" $1}')$(cat "${XDG_CONFIG_HOME:-$HOME/.config}"/newsboat/.update 2>/dev/null)" diff --git a/.local/bin/statusbar/sb-pacpackages b/.local/bin/statusbar/sb-pacpackages new file mode 100755 index 0000000..a9b6cf7 --- /dev/null +++ b/.local/bin/statusbar/sb-pacpackages @@ -0,0 +1,29 @@ +#!/bin/sh + +# Displays number of upgradeable packages. +# For this to work, have a `pacman -Sy` command run in the background as a +# cronjob every so often as root. This script will then read those packages. +# When clicked, it will run an upgrade via pacman. +# +# Add the following text as a file in /usr/share/libalpm/hooks/statusbar.hook: +# +# [Trigger] +# Operation = Upgrade +# Type = Package +# Target = * +# +# [Action] +# Description = Updating statusbar... +# When = PostTransaction +# Exec = /usr/bin/pkill -RTMIN+8 dwmblocks # Or i3blocks if using i3. + +case $BLOCK_BUTTON in + 1) setsid -f "$TERMINAL" -e popupgrade ;; + 2) notify-send "$(/usr/bin/pacman -Qu)" ;; + 3) notify-send "🎁 Upgrade module" "📦: number of upgradable packages +- Left click to upgrade packages +- Middle click to show upgradable packages" ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +pacman -Qu | grep -Fcv "[ignored]" | sed "s/^/📦/;s/^📦0$//g" diff --git a/.local/bin/statusbar/sb-popupgrade b/.local/bin/statusbar/sb-popupgrade new file mode 100755 index 0000000..29d6230 --- /dev/null +++ b/.local/bin/statusbar/sb-popupgrade @@ -0,0 +1,9 @@ +#!/bin/sh + +printf "Beginning upgrade.\\n" + +yay -Syu +pkill -RTMIN+8 "${STATUSBAR:-dwmblocks}" + +printf "\\nUpgrade complete.\\nPress to exit window.\\n\\n" +read -r _ diff --git a/.local/bin/statusbar/sb-price b/.local/bin/statusbar/sb-price new file mode 100755 index 0000000..45b01ad --- /dev/null +++ b/.local/bin/statusbar/sb-price @@ -0,0 +1,38 @@ +#!/bin/sh + +# Usage: +# price +# price bat "Basic Attention Token" 🦁 +# When the name of the currency is multi-word, put it in quotes. + +[ -z "$3" ] && exit 1 +interval="@14d" # History contained in chart preceded by '@' (7d = 7 days) +dir="${XDG_DATA_HOME:-$HOME/.local/share}/crypto-prices" +pricefile="$dir/$1" +chartfile="$dir/$1-chart" + +updateprice() { ping -q -c 1 example.org >/dev/null 2>&1 && + curl -s "rate.sx/1$1" > "$pricefile" && + curl -s "rate.sx/$1$interval" > "$chartfile" ;} + +[ -d "$dir" ] || mkdir -p "$dir" + +[ "$(stat -c %x "$pricefile" 2>/dev/null | cut -d' ' -f1)" != "$(date '+%Y-%m-%d')" ] && + updateprice "$1" + +case $BLOCK_BUTTON in + 1) setsid "$TERMINAL" -e less -Sf "$chartfile" ;; + 2) notify-send -u low "$3 Updating..." "Updating $2 price..." + updateprice "$1" && notify-send "$3 Update complete." "$2 price is now +\$$(cat "$pricefile")" ;; + 3) uptime="$(date -d "$(stat -c %x "$pricefile")" '+%D at %T' | sed "s|$(date '+%D')|Today|")" + notify-send "$3 $2 module" "\- Exact price: \$$(cat "$pricefile") +- Left click for chart of changes. +- Middle click to update. +- Shows 🔃 if updating prices. +- Last updated: + $uptime" ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +printf "$3$%0.2f" "$(cat "$pricefile")" diff --git a/.local/bin/statusbar/sb-torrent b/.local/bin/statusbar/sb-torrent new file mode 100755 index 0000000..6527005 --- /dev/null +++ b/.local/bin/statusbar/sb-torrent @@ -0,0 +1,27 @@ +#!/bin/sh + +transmission-remote -l | grep % | + sed " # The letters are for sorting and will not appear. + s/.*Stopped.*/A 🛑/; + s/.*Seeding.*/Z 🌱/; + s/.*100%.*/N ✅/; + s/.*Idle.*/B 🕰️/; + s/.*Uploading.*/L ⬆️/; + s/.*%.*/M ⬇️/" | + sort -h | uniq -c | awk '{print $3 $1}' | paste -sd ' ' - + +case $BLOCK_BUTTON in + 1) setsid -f "$TERMINAL" -e tremc ;; + 2) td-toggle ;; + 3) notify-send "🌱 Torrent module" "\- Left click to open tremc. +- Middle click to toggle transmission. +- Shift click to edit script. +Module shows number of torrents: +🛑: paused +🕰: idle (seeds needed) +🔼: uploading (unfinished) +🔽: downloading +✅: done +🌱: done and seeding" ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac diff --git a/.local/bin/statusbar/sb-volume b/.local/bin/statusbar/sb-volume new file mode 100755 index 0000000..61588c3 --- /dev/null +++ b/.local/bin/statusbar/sb-volume @@ -0,0 +1,28 @@ +#!/bin/sh + +# Prints the current volume or 🔇 if muted. + +case $BLOCK_BUTTON in + 1) setsid -f "$TERMINAL" -e pulsemixer ;; + 2) pamixer -t ;; + 4) pamixer --allow-boost -i 1 ;; + 5) pamixer --allow-boost -d 1 ;; + 3) notify-send "📢 Volume module" "\- Shows volume 🔊, 🔇 if muted. +- Middle click to mute. +- Scroll to change." ;; + 6) "$TERMINAL" -e "$EDITOR" "$0" ;; +esac + +[ $(pamixer --get-mute) = true ] && echo 🔇 && exit + +vol="$(pamixer --get-volume)" + +if [ "$vol" -gt "70" ]; then + icon="🔊" +elif [ "$vol" -lt "30" ]; then + icon="🔈" +else + icon="🔉" +fi + +echo "$icon$vol%" diff --git a/.local/bin/statusbar/torrent b/.local/bin/statusbar/torrent deleted file mode 100755 index 6527005..0000000 --- a/.local/bin/statusbar/torrent +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/sh - -transmission-remote -l | grep % | - sed " # The letters are for sorting and will not appear. - s/.*Stopped.*/A 🛑/; - s/.*Seeding.*/Z 🌱/; - s/.*100%.*/N ✅/; - s/.*Idle.*/B 🕰️/; - s/.*Uploading.*/L ⬆️/; - s/.*%.*/M ⬇️/" | - sort -h | uniq -c | awk '{print $3 $1}' | paste -sd ' ' - - -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e tremc ;; - 2) td-toggle ;; - 3) notify-send "🌱 Torrent module" "\- Left click to open tremc. -- Middle click to toggle transmission. -- Shift click to edit script. -Module shows number of torrents: -🛑: paused -🕰: idle (seeds needed) -🔼: uploading (unfinished) -🔽: downloading -✅: done -🌱: done and seeding" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac diff --git a/.local/bin/statusbar/volume b/.local/bin/statusbar/volume deleted file mode 100755 index 61588c3..0000000 --- a/.local/bin/statusbar/volume +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh - -# Prints the current volume or 🔇 if muted. - -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e pulsemixer ;; - 2) pamixer -t ;; - 4) pamixer --allow-boost -i 1 ;; - 5) pamixer --allow-boost -d 1 ;; - 3) notify-send "📢 Volume module" "\- Shows volume 🔊, 🔇 if muted. -- Middle click to mute. -- Scroll to change." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -[ $(pamixer --get-mute) = true ] && echo 🔇 && exit - -vol="$(pamixer --get-volume)" - -if [ "$vol" -gt "70" ]; then - icon="🔊" -elif [ "$vol" -lt "30" ]; then - icon="🔈" -else - icon="🔉" -fi - -echo "$icon$vol%" -- cgit v1.3.1